测试系统
无线通信与车联网测试
新能源与电动汽车测试
半导体与功率器件测试
有源医疗器械测试
电磁兼容（EMC）及场强测试
环境可靠性测试
高速串行接口测试
光通信与光器件测试
音频与声学测试
广播电视与视频测试
光和色彩测量
物理与化学分析测试
新能源与电动汽车
电磁兼容性EMC
半导体与器件
中试平台建设方案
无线通信与车联网
医疗器械
自动化测试
高速串行接口测试
低空经济
| Model Name | USB-61210 |
| Analog Input | |
| Resolution | 16-Bit |
| Number of channels | 4 differential (simultaneous-sampling) |
| Maximum sampling rate | 2MS/s per channel |
| Programmable gain | 1, 5 |
| Input range (Voltage) | ± 10 V, ± 2 V |
| Offset error | ± 1mV (gain=1) ± 0.2mV (gain=5) |
| Gain error | Typical: ± 0.01% of FSR (gain=1 & 5) Maximum: ± 0.02% of FSR (gain=1 & 5) |
| -3dB Bandwidth | 600 kHz |
| CMRR(fin=1 kHz) | 80 dB (gain=1) 90 dB (gain=5) |
| SFDR (fin=10 kHz) | 98 dB (gain=1 & 5) |
| SINAD (fin=10 kHz) | 89 dB (gain=1 & 5) |
| THD (fin=10 kHz) | -100 dB (gain=1 & 5) |
| SNR (fin=10 kHz) | 89 dB (gain=1 & 5) |
| ENOB(fin=10 kHz) | 14.3-bit (gain=1 & 5) |
| FIFO buffer size | 256M Samples |
| Trigger sources | Software, external digital, analog trigger ( from one analog input channel) |
| Trigger mode | Post trigger, pre-trigger, delay trigger, middle trigger, gate trigger, post or delay trigger with re-trigger |
| External A/D conversion source | Yes (from CONV) |
| Input coupling | DC |
| Overvoltage protection | Power on: ± 35 V Power off: ± 15V |
| Input impedance | 1 GΩ |
| Data transfer | Programmed I/O, continuous (USB bulk transfer mode) |
| Function I/O | |
| Mode* | Digital I/O, general timer/counter, pulse generation |
| Digital I/O | 8 DI / 4 DO (TTLLVTTL level) |
| General timer/counter | Two 32-bit, base clock: 80 MHz, external to 10 MHz |
| Pulse generation | Two PWM outputs (Modulation frequency: 0.01 Hz to 5 MHz; duty cycle: 1%-99%) |
| Interface | USB 2.0 high speed |
| I/O connector | Two 20-pin removable screw terminals |
| Operating temperature | 0 to 55°C (32 to 131°F) |
| Storage temperature | -20 to 70°C (-4 to 158˚F) |
| Relative humidity | 5 to 95% non-condensing |
| Power requirements | 5V@ 500 mA (USB bus powered) |
| Requirements | 114 mm (H) x 156.5 mm (L) x 41.3 mm (W) (4.5” x 6.16” x 1.63”) (without connector and stand) |
Note: As function I/Os share the same I/O pins, only one of these modes can be selected.
寻找更多销售、技术和解决方案的信息？
广州绿测电子科技有限公司（简称：绿测科技）成立于2015年11月，是一家专注于耕耘测试与测量行业的技术开发公司。绿测科技以“工程师的测试管家”的理念向广大客户提供专业的管家服务。绿测科技的研发部及工厂设立于广州番禺区，随着公司业务的发展，先后在广西南宁、深圳、广州南沙、香港等地设立了机构。绿测科技经过深耕测试与测量领域多年，组建了一支经验丰富的团队，可为广大客户提供品质过硬的产品及测试技术服务等支持。
技术工程师
销售经理
020-22042442
广东公司：冯经理
020-2204 2442-9-822
广西公司：何经理
020-2204 2442-9-880
