![](/uploads/allimg/210702/1-210F2164I20-L.jpg)
Model Name | USB-61901 | USB-61902 | USB-61903 |
Analog Input | |||
Resolution | 16-Bit | ||
Number of channels | 16 SE / 8 Pseudo-diff, voltage input | 8 Current inputs | |
Maximum sampling rate (single channel) | 250 kS/s(Multiplexing, channel-gain-queue) | ||
Programmable gain | 1, 5, 10, 50 | 1 | |
Input range (Voltage) | ± 10 V, ± 2 V, ± 1 V, ± 200 mV | N/A | |
Input range (Current) | N/A | 0-20 mA | |
Offset error | ± 0.1 mV (gain=1) | ±0.01 mA (typical) | |
Gain error | ± 0.05% of FSR (gain=1) | ±0.05% of FSR (typical) | |
-3dB small signal bandwidth (gain=1) | 600 kHz | ||
CMRR (gain=1) | 90 dB | - | |
SFDR (gain=1) | 108 dB | - | |
SINAD (gain=1) | 89 dB | - | |
THD (gain=1) | 102 dB | - | |
SNR (gain=1) | 89 dB | - | |
ENOB (gain=1) | 14.5-Bit | - | |
FIFO buffer size | 4 k samples | ||
Trigger sources | Software, external digital, analog trigger ( from one of analog input channels) | ||
Trigger mode | Post trigger, delay trigger, retrigger, gate trigger | ||
External conversion source | Yes (up to 250 kS/s) | ||
Input coupling | DC | ||
Overvoltage protection | Continuous ± 24 V | ||
Input impedance | High impedance > 1 GΩ | 249.5 Ω (input resistor) | |
Data transfer | Programmed I/O, continuous (USB bulk transfer mode) | ||
Analog Output | |||
Number of channels | N/A | 2 voltage outputs | |
Resolution | - | 16-Bit | |
Maximum update rate | - | 1 MS/s (simultaneous update) | |
Output range | - | ± 10 V | |
Offset error | - | ± 0.15 mV | |
Gain error | - | ± 0.05% of FSR | |
INL | - | ≤ 1 LSB | |
DNL | - | < 1 LSB | |
Output driving capacity | - | ± 5 mA | |
Slew rate | - | 2.2 V/μs | |
Settling time (0.1% of Full scale) | - | 26 μs | |
Rising time | - | 6 μs | |
Falling time | - | 6 μs | |
FIFO | - | 10 k samples (2-CH sharing) | |
Output mode | - | Programmed I/O, continuous (USB bulk transfer mode) | |
Function I/O | |||
Mode* | Digital I/O, general timer/counter, pulse generation | ||
Digital I/O | 8 DI / 4 DO (TTL level) | ||
General timer/counter | Two 32-Bit, base clock: 80 MHz, external to 10 MHz | ||
Pulse generation | Two PWM outputs (Modulation frequency: 0.01 Hz to 5 MHz; Duty cycle: 1%-99%) | ||
Interface | USB 2.0 high speed, mini-USB connector | ||
I/O connector | Two 20-pin screw terminals | ||
Operating temperature | 0 to 55°C (32˚F to 131˚F) | ||
Storage temperature | -20 to 70°C (-4˚F to 158˚F) | ||
Relative humidity | 5 to 95% non-condensing | ||
Power requirements | 5V@400 mA (USB bus powered) | ||
Dimensions | 114 mm (H) x 156.5 mm (L) x 41.3 mm (W) (4.5” x 6.16” x 1.63”) (without connector and stand) |
寻找更多销售、技术和解决方案的信息?
广州绿测电子科技有限公司(简称:绿测科技)成立于2015年11月,是一家专注于耕耘测试与测量行业的技术开发公司。绿测科技以“工程师的测试管家”的理念向广大客户提供专业的管家服务。绿测科技的研发部及工厂设立于广州番禺区,随着公司业务的发展,先后在广西南宁、深圳、广州南沙、香港等地设立了机构。绿测科技经过深耕测试与测量领域多年,组建了一支经验丰富的团队,可为广大客户提供品质过硬的产品及测试技术服务等支持。
技术工程师
销售经理
020-22042442
广东公司:冯经理
020-2204 2442-9-822
广西公司:何经理
020-2204 2442-9-880